Foil Drive Battery Grease

Foil Drive Battery Grease


1x 15g Tube of Diolectric Grease

In stock

Dielectric Battery Grease should be used on all connections (Battery and Motor Plug) before every use to ensure a reliable connection between unit and motor cable, protecting against corrosion, heat, and oxidation.

Foil Drive Dielectric Grease has been specifically selected for the product and environmental use case. We recommend only using Foil Drive Battery Grease as we cannot guarantee the reliability of third party grease.

What is dielectric grease and why is it used?

Dielectric grease is a special grease that is designed to lubricate electrical connections to prevent corrosion and improve connection. The continued use of this grease is imperative to keep your unit protected for the long run.

Where do I use the grease?

a. The battery connection plug

b. Plug inside unit

c. Removable motor plug

d. Blanking plug

How often do I apply it?

Every single time you are entering the ocean! If you are foiling in fresh water, you can extend this out to every second use.

How do I apply it?

A. On the front of the battery, apply a generous amount to the connector.

B. By applying a generous amount on the battery connector, all you need to do it grab the battery and push it into the plug inside the unit. This will now put dielectric grease on the receiving plug inside the unit. You can push it in and out a few times to cover the internal plug.

C. Apply a layer across the three pins on the unit, and another layer across the pins on the motor plug.

D. Apply a small amount on the blanking plug when placing it back on the unit when not in use.

What do I do when I run out?

We have included two tubes of the dielectric grease with your unit at the time of purchase. Before you run out completely, purchase more tubes from us!