2023 F-One Plane Seven Seas 1000 Foil Kit (Front wing, tail wing, fuselage, hardware)

2023 F-One Plane Seven Seas 1000 Foil Kit (Front wing, tail wing, fuselage, hardware)

$1,349.00

What’s included?

  • Seven Seas Carbon 1000 Front Wing
  • Carbon Fuselage XXXS
  • C250 Fence Stabilizer HM
  • Torx T30 Tool
  • Includes Hardware and EVA soft covers for front wing, tail wing, fuselage

Out of stock

SEVEN SEAS CARBON

The SEVEN SEAS is the foil that will help you ease into the amazing downwind world and provide incredible glide sensations.

  • Aspect Ratio: 7.5
  • Fantastic glide, upwind, and speed abilities
  • Makes downwind foiling accessible
  • Thin profile and optimized design for minimal drag

Ref.  77227-0141

 

 

 

 

 

 

Technical Specifications

The SEVEN SEAS’s high aspect ratio and thin profile brings great downwind abilities and offers the best glide. The front wing is equipped with fences on the wingtips to reduce the induced drag and improve the foil’s overall performances and maneuverability.

Once you’re up to your cruising speed, its lift will make it easy for you to keep your glide for a long time. Pumping is reliable and constant even at low speeds, and you will be able to connect the waves and catch any upcoming bumps more easily.

This new line positions itself perfectly as an intermediary between the EAGLE HM CARBON and the PHANTOM CARBON ranges. Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong.

This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The TITAN connection allows to plug in either an aluminum or carbon mast, and the fuselage is split in two to facilitate transport.

 

 

 

 

This set comes with the new C250 FENCE stab: This stabilizer is also set up with fences to bring even more maneuverability to the entire plane. If you already ride with a PHANTOM foil and wish to improve your glide in downwind, the SEVEN SEAS is made for you.

Stabilizer C250 Fence HM
The C250 FENCE HM stabilizer has been specifically designed to enhance maneuverability through the addition of fences on the wingtips.
This stab is also incredibly stable while upwind or yawing and will delay the stall of the foil.
High maneuverability Stability upwind and yawing Thin profile and optimized design for minimal drag The High Modulus Carbon fiber layup used for this stab leads to even more rigidity and dependability that will propel you to incredible performances in each session.
This stab goes great with our SEVEN SEAS front wings and will help bring even more maneuverability to the entire plane.
Stabilizer Technical Specifications
Area: 250 cm² Span: 39 cm Aspect Ratio: 6.1 Weight: 0.18 kg

Technology

MONOBLOC STRUCTURE

Having a stiff and solid assembly between all the parts of the foil is key to making it perform at its best as well as easy to handle.

The connection of the front wing with the fuselage is highly stressed and loaded, so it is one of the critical areas of the assembly in terms of structures.

The Monobloc wings are molded together with the fuselage in one shot, thereby removing the connection and the chances for unwanted and parasitic movements.

The structural fibers of the fuselage are spread into the wing to achieve the smoothest and lightest connection.

It is also incredibly stiff and provides absolute control at all times, with the foil responding perfectly to all of the riders’ input.

When the overall dimensions are too large for convenient transportation, a connection is set into the fuselage, behind the mast where the loads are smaller.

TITAN CONNECTION

The TITAN connection enables a very stiff and direct connection between two parts, locking efficiently any movement in all directions.
Its format is compact which is hydrodynamically efficient and very easy to use, assemble and disassemble.

PRE PREG TECHNOLOGY

Pre-preg makes the foils stiffer and stronger. With pre-preg fabrics, the carbon fiber is directly impregnated with epoxy resin by its manufacturer. This guarantees a perfect ratio between epoxy and carbon and represents the highest quality process. It is then cured at high temperature, bringing strength and durability.

Quality control is much better and so is the working environment for the people building our foils. Pre-preg fabrics offer the lightest weight with the best mechanical properties of carbon fiber.