2012 Liquid Force ENVY Complete

2012 Liquid Force ENVY Complete

$624.99

2012 Liquid Force Envy Kite with CPR Control System and Super Shaft Pump

Out of stock

 

Envy


BE THE ENVY ON THE BEACH!

Rock solid stability, directional float, pivotal turning and effortless re-launch highlight the Envy’s “beyond delta” design for all around performance.This ultra lightweight three- strut platform gives light, responsive bar feel with impulse pivotal turning.

The Envy’s flight characteristics blend to produce a distinct “set it and forget it” feel.This makes it the perfect kite for everything from progressive wave riding to kite low freestyle domination.

Land a jump a bit too hot, under run the kite in a bottom turn… forget about it! The Envy’s lightweight design allows the kite to float directionally, enabling you to forget about the kite and concentrate on the important issues: making grabs, spotting landings and reading waves straight into the pit.

Size : 5m | 7m | 9m | 12m | 15m

 

Envy Features

  • USB 3.1 – ULTRA STABLE EQUALIZING BRIDLE
  • EXO STRUT, ULTIMATE STRUCTURAL BONDING
  • UNIQUE LF DIAMOND WINGTIP DESIGN
  • DOUBLE LAYER LEADING EDGE CONSTRUCTION
  • SUPERIOR MATERIAL TEIJIN RIPSTOP T9600
  • GLUED AND STITCHED PANEL ASSEMBLY
  • MAXFLOW INFLATION SYSTEM, INFLATE KITE 40% FASTER
  • CRP, 100% DEPOWER – CENTER LINE PUSH RELEASE

MAX FLOW INFLATION ONE PUMP

The future is now, and this future is inflated quicker and easier by the LF Max Flow Valve. Imagine a kite that inflates in 40% less time, getting you on the water faster and leaving your friends still pumping on the beach. The LF Max Flow valve can bring it and only the full range of LF kites has it!  This new one-way high airflow valve mixed with our completely redesigned, gauge-equipped pump will change your life.  Once you go Max Flow, you never go back!

 

CPR CONTROL SYSTEM EQUIPPED
100% DEPOWER – CENTER LINE PUSH RELEASE

The LF CPR release allows riders an instant and effortless safety release of the kite, with either hand, from the front or back of the bar, to either the 100% de-power flag line or 90% de-power mainline leash options.

BRIDLES SYSTEM – USB 3.0. / ULTRA STABLE BRIDLE

A reliable bridle is a primary focus of kite design at Liquid Force.  The LF USB 3.0 Bridle is a Proven LF cascade SLE bridle system with one static wingtip pulley. Instant depower, re-launch and stability are the #1 goals.

EXO STRUT TECHNOLOGY – ULTIMATE STRUCTURAL BONDING

Designed and developed by Julien Fillion. The Exo Strut brings strut construction to a new level of rigidity and strength focusing on the areas of the struts that absorb the force of impact on hard crashes and washings in the surf.

WINGTIPS – UNIQUE LF DIAMOND WINGTIP DESIGN

While most other kite designs on the market only use round wingtips, at Liquid Force we believe in our unique Diamond Wingtip design.  The Diamond Wingtip not only provides huge de-power and easier re-launch over traditional curved wingtips, but also a rigid structure as well as instant and predictable kite response.
The LF Diamond Wingtip also supplies smooth, constant pull and power through turns while still effectively de-powering the kite when needed.

REINFORCED LEADING EDGE STRUCTURE – DOUBLE LAYER LE CONSTRUCTION

When crashing at full power, no other part of the kite absorbs as much impact as the leading edge, specifically the center of the leading edge. Our center leading edge segments are beefed up by doubling the amount of Dacron used in production, but only where it’s truly needed.  This will not increase the weight of the LE but will give your kite the ability to hit the water hard all day, worry free.

SUPERIOR QUALITY CANOPY MATERIAL – TEIJIN RIPSTOP T9600

When most of the kiteboarding brands out there stopped using this very high end material due to cost increases, we at Liquid Force stood our ground! We strongly believe that the use of Teijn Ripstop T9600 is essential to high quality kite design.  Your kite will repeatedly perform like the day it was pulled out of the plastic and hold a much higher resale value.

BOMB PROOF CONSTRUCTION – GLUED AND STITCHED PANEL ASSEMBLY

The entire panel layout of our kites is glued and stitched using an overlapped seam assembly.  This construction has proven to be the strongest on the market.  We have also discovered the perfect Dacron reinforcement to weight ratio to ensure the highest quality for your investment.   Our signature molded EVA leading edge bumpers are light, strong and will protect your LE during self launch, hard crashes, snow re-launch, and everyday wear and tear.